 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Accessories & Underlays
Here at Woodenfloors.uk.com we offer a complete range of solid wood accessories to compliment your new timber floors. Along with these we offer range of standard poly foam and rubber compound underlays with built in DPM’s and a selection decible rated noise reduction underlays if required. Take a look through our product range, for more information and prices, contact us on 020 7625 1701. Or email enquire@woodenfloors.uk.com
L Section or End Cap is required when finishing to a front, back or patio door or to a fireplace or to frame a mat well.
Rebated R Section or Ramp Reducer is required when the finishing floor is higher than the floor it adjoins to. For instance a carpet, tiled or lino type floor.
T Section or Flat Section is required where two floor levels are the same in height either by wood to wood or wood to tile or in some cases wood to carpet.
Wood to Carpet Section or Semi Reducer is required where the floor heights are only within a 5 -10 mm difference. More commonly this would be used for where there is carpet covering or tile.
Scotia or Perimeter Beading is required where the skirting boards are insitu and the expansion gap needs to be covered.
15 mm Solid Stair nosing to finish the floors at a step or when cladding a stair case to match your new floors.
20 mm Solid Stair nosing to finish the floors at a step or when cladding a stair case to match your new floors.
Technics 5 Rubber Underlay. Best for installations where noise reduction needs to meet a certain criteria. Upto 27dB reduction on transmitted impact noise-5 mm thickness.
Duralay Heatflow Underlay. To used for certain Underfloor Heating Systems (call for details) 3 mm thickness. Important: A 1000 gauge DPM is required when laying over a concrete subfloor.
Timbermate Excel Silver Underlay. To be used where there is a concrete slab or where moisture could be an issue (not exceeding 75% RH) Upto 23dB reduction on transmitted impact noise-3.6 mm thickness.
Timbermate Silent Floor Gold. The ultimate solution to noisy laminate or engineered wood floors. Offers the highest acoustic performance from the Duralay range with a built in DPM barrier protecting against moisture (not exceeding 75% RH). Upto 24dB reduction on transmitted impact noise-4.2 mm thickness.
Standard Poly foam Underlay to be used where impact noise and sub floor moisture is not an issue-2.5 mm thickness
Sikabond T54 Trowelled Flexible Wood Adhesive. Compatible with underfloor heating if required. For use on most solid strip and engineered wood flooring.
Sika Primer MB 1 Coat Solvent Free Moisture Barrier Primer. Excellent adhesion promoter over mastic asphalt and ‘old’ adhesive residues. Strengthens dusty substrates, tinted blue for visual control. Moisture barrier system up to 4% moisture by volume (75% RH). Drying time 12 hours at 20c
